Freight from Khorramabad
Khorramabad loads at Khorramabad. Tehran is about 463 km away, and a 24-tonne trailer works out at roughly 1,396 Toman per kilogram of steel. The table repeats that calculation for every destination.
Freight from Khorramabad by destination
| Kermanshah | 188 km | 19,235,938 | 801 |
|---|---|---|---|
| Ahvaz | 304 km | 25,810,709 | 1,075 |
| Qom | 331 km | 27,433,329 | 1,143 |
| Isfahan | 403 km | 31,073,723 | 1,295 |
| Karaj | 441 km | 32,674,351 | 1,361 |
| Tehran | 463 km | 33,506,928 | 1,396 |
| Rasht | 545 km | 37,092,325 | 1,546 |
| Urmia | 676 km | 43,155,459 | 1,798 |
| Tabriz | 679 km | 43,303,753 | 1,804 |
| Yazd | 736 km | 45,576,066 | 1,899 |
| Shiraz | 737 km | 45,638,997 | 1,902 |
| Kerman | 1122 km | 57,812,459 | 2,409 |
| Bandar Abbas | 1292 km | 63,053,515 | 2,627 |
| Mashhad | 1340 km | 64,363,451 | 2,682 |
| Zahedan | 1581 km | 70,515,846 | 2,938 |
Where these numbers come from
Distance is the straight line between the two cities times 1.25 for road circuity. The driver’s net fare comes from the tonne-kilometre index and the distance coefficient; on top of it sit a 9% cargo levy, 0.5% supplementary driver insurance and an 8% bill-of-lading commission, about 17.5% in all. Loading is charged separately and is not included.
These are estimates, not quotes. A real fare moves with loading conditions, season, return loads and what the driver agrees to. Call the desk for a firm rate.
Frequently asked questions
How is rebar freight calculated in Iran?
The base fare is tonnes carried times kilometres travelled times the official tonne-kilometre index, adjusted by a distance coefficient. On top of the driver’s net fare come a 9% cargo levy, 0.5% supplementary insurance and an 8% bill-of-lading commission.
What is the 1405 tonne-kilometre index?
Since 15 Khordad 1405 the index is 16,680 Rial, or 1,668 Toman, per tonne-kilometre. It was previously 13,190 Rial, so this was a rise of about 26.5%.
How much can an Iranian trailer carry?
A five-axle eighteen-wheel trailer has a legal maximum gross weight of 44 tonnes and in practice loads about 22 to 24 tonnes of steel. A three-axle ten-wheeler is capped at 28 tonnes gross and carries about 15 tonnes; a Khavar carries four to six.
What is the difference between ex-works and delivered price?
An ex-works price is the steel sitting on the mill’s ground, with no transport in it. A delivered price is that plus the freight to your yard. Over a long haul the difference can be several percent of the goods, so comparing two mills without it is misleading.
Why does a part load cost more per kilogram?
Freight is charged per trip, not per kilogram. A four-tonne Khavar costs less per trip than a trailer, but because it carries far less, each kilogram carries more of the fare. A full trailer is always the cheapest case per kilogram.
What about small pickup loads?
For small loads and city runs the Iranian trade uses a Nissan pickup, which carries up to about two tonnes. The association tariff these numbers are calibrated against carries no ratio for a pickup — that work is negotiated directly — so the calculation here starts at the four-tonne Khavar.
Does the freight figure include VAT?
The figure shown includes the cargo levy and the bill-of-lading commission but not VAT. VAT on the goods is applied separately, with its own toggle on the price tables.