Case-hardening steel: a hard surface and a tough core

Case-hardening steel usually starts with lower carbon to retain a tough core; surface carburizing followed by quenching produces a hard case. Evaluate technical specifications, the price basis, delivery terms and quality evidence together. A lower number is not a comparable offer if it covers a different grade, weight, coating or delivery scope.[1][2]

For alloy steel sourced through Iran, require the original producer, heat identity, current standard, full grade, delivery condition and test certificate to remain linked through stockholding and cutting. Importers should obtain engineering acceptance against their destination project requirements before accepting a proposed equivalent. Compare offers in the agreed currency at a named delivery location, including machining allowances, inspection, protective packing and freight; an inexpensive bar or block can become costly if its core properties or traceability are unsuitable.

Temperature, time and carbon potential determine the carbon profile. Hardening, retained austenite, grain size, grinding burn and residual stress affect contact life.[2][3][4]

Specify grade and cleanliness, delivery condition, dimensions, hardenability, target case depth, surface and core hardness, distortion allowance and testing. Compare offers only after aligning units, the weight basis, taxes, packaging, loading, freight and quote validity. An omitted cost can outweigh the apparent saving per kilogram. Keep the supplier’s currency and payment date visible before converting to your purchasing currency.

Ask every supplier to answer the same written specification. This prevents an apparently cheaper offer from silently changing the product or scope. Confirm the following before comparing prices:

Use this table to structure the decision. It does not replace engineering calculations or the contract. The final column identifies the evidence to review before accepting an offer.

Errors often begin when a trade name replaces a technical specification, one photograph stands for an entire shipment, or the delivery scope is missing from the quote. Address these specific risks: Unsuitable case depth; Core too soft or brittle; Distortion; Omitting grinding allowance. Turn each risk into a written acceptance criterion, sampling requirement or traceable document.

A standard number alone does not demonstrate conformity. Specify the edition, grade, dimensions, tolerances, test method, heat or batch number and acceptance authority. For an import project, confirm the destination’s requirements and the project’s approved specification; an Iranian market designation is not automatic evidence of an equivalent local grade.

Surface hardness alone is incomplete without case depth and core properties. Include a section hardness profile in material and component orders.[4][5]

Before ordering, prepare a single comparison sheet covering the product, quantity, unit, theoretical and actual weight, base price, taxes, freight, delivery window, documents and acceptance criteria. Identify who pays each cost and who records discrepancies at receipt. This makes the negotiation clearer and gives the receiving team an agreed basis for checking the shipment.