Freight from Khayyam Steel Neyshabur

Khayyam Steel Neyshabur loads at Neyshabur. Tehran is about 836 km away, and a 24-tonne trailer works out at roughly 2,046 Toman per kilogram of steel. The table repeats that calculation for every destination.

2,046 Per kilogram
Tehran 836 km

Other mills load from the same point: Khayyam Sepehr Steel Neyshabur. The freight is identical.

Freight from Khayyam Steel Neyshabur by destination

Mashhad92 km11,666,382486
Yazd788 km47,490,8881,979
Tehran836 km49,115,8882,046
Kerman848 km49,477,4002,062
Karaj884 km50,580,3532,108
Qom923 km51,649,1282,152
Isfahan955 km52,455,4622,186
Zahedan964 km52,684,0332,195
Rasht1036 km54,832,3532,285
Shiraz1171 km59,426,5652,476
Bandar Abbas1289 km62,983,3462,624
Ahvaz1352 km64,692,9962,696
Kermanshah1354 km64,749,3292,698
Tabriz1408 km66,105,8282,754
Urmia1535 km69,221,1902,884

Where these numbers come from

Distance is the straight line between the two cities times 1.25 for road circuity. The driver’s net fare comes from the tonne-kilometre index and the distance coefficient; on top of it sit a 9% cargo levy, 0.5% supplementary driver insurance and an 8% bill-of-lading commission, about 17.5% in all. Loading is charged separately and is not included.

These are estimates, not quotes. A real fare moves with loading conditions, season, return loads and what the driver agrees to. Call the desk for a firm rate.

Related routes

Frequently asked questions

How is rebar freight calculated in Iran?

The base fare is tonnes carried times kilometres travelled times the official tonne-kilometre index, adjusted by a distance coefficient. On top of the driver’s net fare come a 9% cargo levy, 0.5% supplementary insurance and an 8% bill-of-lading commission.

What is the 1405 tonne-kilometre index?

Since 15 Khordad 1405 the index is 16,680 Rial, or 1,668 Toman, per tonne-kilometre. It was previously 13,190 Rial, so this was a rise of about 26.5%.

How much can an Iranian trailer carry?

A five-axle eighteen-wheel trailer has a legal maximum gross weight of 44 tonnes and in practice loads about 22 to 24 tonnes of steel. A three-axle ten-wheeler is capped at 28 tonnes gross and carries about 15 tonnes; a Khavar carries four to six.

What is the difference between ex-works and delivered price?

An ex-works price is the steel sitting on the mill’s ground, with no transport in it. A delivered price is that plus the freight to your yard. Over a long haul the difference can be several percent of the goods, so comparing two mills without it is misleading.

Why does a part load cost more per kilogram?

Freight is charged per trip, not per kilogram. A four-tonne Khavar costs less per trip than a trailer, but because it carries far less, each kilogram carries more of the fare. A full trailer is always the cheapest case per kilogram.

What about small pickup loads?

For small loads and city runs the Iranian trade uses a Nissan pickup, which carries up to about two tonnes. The association tariff these numbers are calibrated against carries no ratio for a pickup — that work is negotiated directly — so the calculation here starts at the four-tonne Khavar.

Does the freight figure include VAT?

The figure shown includes the cargo levy and the bill-of-lading commission but not VAT. VAT on the goods is applied separately, with its own toggle on the price tables.

Today’s Khayyam Steel Neyshabur pricesSteel freight rates